Other
Interesting Items:
1976-1991 Ford E350 - W/ Rear Drum Brakes
Front HPS Hawk Brake Pads - HPS - High
Performance Street Superior Stopping Power HPS -
High Performance Street disc brake pads are world renowned for increasing stopping
power on your street legal vehicle. Increasing the performance of your vehicles
braking system is easy when you choose Hawk Performance?s HPS braking compound.
This unique Ferro-Carbon formula was developed for street performance using the safety
and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over
stock brake pads and can provide you 20-40% more stopping power and
higher resistance to brake fade than most standard replacement pads. Less fade
means you?ll have a highly durable brake pad with less brake dust..
HPS Ferro-Compound Features: ? Increased stopping power
? High friction/torque hot or cold ? Gentle
on rotors ? Extended pad life ? Low
dust ? Virtually noise-free All
Hawk Performance High Performance Street brake pads provide a limited lifetime warranty,
ensuring products to be free of defects from manufacturer?s workmanship and materials.
Note: Hawk Performance burnishes its High
Performance Street brake pads as a final step in the factory, but
all brake pads have to be bedded-in with the rotors (new or
used) that they will be used against. Properly bedding-in new brake pads
results in a transfer film being generated at the pad and rotor
interface to maximize brake performance. Brake Pad Installation
Procedure 1. Install brake pads properly. Be sure pads are
securely positioned in the caliper. 2. Flush system with
fresh brake fluid. 3. Check all hydraulic parts for
excess wear and tear. 4. Check disc for proper
thickness, parallelism, and lateral runout. 5. Check disc for
scoring or grooves over .012?depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from
the previous brake pads must be removed. Sand discs with 130 grit
sandpaper using moderate pressure. Use soap and water to clean discs? surface
after sanding and machining. Discs should be free and clear of oil,
grease, and brake fluid. 7. Inspect calipers for freedom
of movement. Lubricate where necessary. Burnishing Instructions
1. After installing new brake pads, make 6 to 10 stops
from approximately 30-35 mph applying moderate pressure. 2. Make
an additional 2 to 3 hard stops from approximately 40 to 45
mph. 3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
|
New
Listing:
1993-1997 Mazda MX-6
Buddy Complete Body Kit, Duraflex Fiberglass - DURAFLEX technology is a revolutionary
product which combines fiberglass, plastic, and flex resins to obtain its unique
features. DURAFLEX products obtain a much higher durability rate than the average
fiberglass product, reducing shipping damages up to 75%. Every DURAFLEX product is
inspected through a rigorous quality control process giving consumers the highest quality
product available with superior craftsmanship. This process ensures that DURAFLEX products are
free from normal fiberglass deficiencies including waviness, spider cracks, chips, and gel
coat damage. DURAFLEX products come finished with a
shiny black gel coat, high quality mesh, hardware kit, and an installation
guide. With such attention to detail, DURAFLEX products are surprisingly affordable, roughly
50% of the cost of a comparable high quality JDM product. DURAFLEX
products include many advantages of both fiberglass and poly- urethane aerodynamics, while
leaving out most of the disadvantages. In essence, our new DURAFLEX products
will give you the highest quality product at the most affordable prices.
Features: - Glossy black gel coat finish
- Shiny, high quality metal mesh - Hardware kit
- Installation guide - Reduced damage rate up to 75%
- Extremely affordable, roughly half the cost of Urethane Extreme
Dimensions, Inc. is a world renowned aftermarket automotive aerodynamic company headquartered in
the United States. Extreme Dimensions currently manufacturers and distributes over 6,000 products
worldwide including Europe and Asia. From their humble beginnings in the summer
of 2000, they have striven to offer the largest variety of high
quality aerodynamic products at the most affordable prices. Extreme Dimensions, Inc. is
dedicated to excellent service, meeting and surpassing all industry standards. Since the
beginning, they have been designing, manufacturing, and distributing aerodynamic parts for the
import, domestic, truck, and SUV industries. Extreme Dimensions has
relocated in 2005 to a new distribution center located in Southern California
which exceeds 50,000 sq/ft to accommodate our growth and continue to provide
excellent customer service. They have pride themselves in being a service oriented
company offering a 95% fill rate on orders to satisfy our customers
needs. What sets them apart from the competition is that they are
truly a manufacturer, importer, and distributor of fiberglass and carbon composites, offering
the largest selection of aerodynamic products in the industry. With thousands of
parts available, Extreme Dimensions offers you the choice of fiberglass, high quality
Carbon Creations carbon products, and our new line of DuraFlex
products which combine quality and technology. Our goal is to offer our
loyal customers the most modern and convenient access for up-to-date and accurate
information on our products, which our customers have come to expect from
us. This Complete Kit Includes Buddy Front Bumper,
Buddy Side Skirts, and |
